PM4329-FEI High Density T1 E1 J1 Line Interface Unit Device
| Microsemi |
| Product Category: | Telecom Interface ICs |
| RoHS: | |
| Tray |
| Brand: | Microsemi |
| Moisture Sensitive: | Yes |
| Product Type: | Telecom Interface ICs |
| Subcategory: | Interface ICs |
Product Highlights
●Monolithic device that integrates 32 T1/1/E1 shorthaul line
interface circuits
●Software selectable between E1 and T1 mode, in groups of 16 links
●Links 1-16 and 17-32 can be configured for either T1 or E1 mode
●Meets or exceeds T1/J1 and E1 shorthaul network access
specifications including ANSI T1.102, T1.403, T1.408, AT&T TR
62411, ITUT G.703, G.704 as well as ETSI 300- 011, CTR-4, CTR-12,
and CTR-13
●Provides encoding and decoding of B8ZS, HDB3, and AMI line codes
●Provides per receiver, clock recovery, and line performance monitoring
●Provides transmit and receive jitter attenuation
●Provides support for redundancy
●Provides a digitally programmable Shorthaul pulse template per transmitter
●Provides a selectable, per channel independent dejtteredT1 or E1 recovered
clock for system timing and redundancy
●Provides PRBS generators and detectors on each tributary for
error testing at DS1 and E1 rates as recommended in ITU-T O.151
●Provides an 8 bit microprocessor bus interface for configuration, control, and status monitoring
●Provides line and digital loopback modes
●Supports programmable inband loopback codes
●Uses line rate system clock
●Provides an IEEE 1149.1 (JTAG) compliant test access port (TAP)
and controller for boundary scan test
System Interface
●Supports the following system interfaces:
High-density SBI bus interface
High-density, low latency, SBI TR bus interface
Receive Section
●Supports T1 signal reception signal reception for distances with
typically up to 24dB of cable attenuation using PIC 22 gauge cable
●Supports E1 signal reception signal reception for distances with
typically up to 22dB of cable attenuation using PIC 22 gauge cable .
●Performs B8ZS or AMI decoding when processing a bipolar DS-1.
signal, and HDB3 or AMI decoding when processing a bipolar E1 signal
Product Highlights
●Monolithic device that integrates 32 T1/1/E1 shorthaul line
interface circuits
●Software selectable between E1 and T1 mode, in groups of 16 links
●Links 1-16 and 17-32 can be configured for either T1 or E1 mode
●Meets or exceeds T1/J1 and E1 shorthaul network access
specifications including ANSI T1.102, T1.403, T1.408, AT&T TR
62411, ITUT G.703, G.704 as well as ETSI 300- 011, CTR-4, CTR-12,
and CTR-13
●Provides encoding and decoding of B8ZS, HDB3, and AMI line codes
●Provides per receiver, clock recovery, and line performance monitoring
●Provides transmit and receive jitter attenuation
●Provides support for redundancy
●Provides a digitally programmable Shorthaul pulse template per transmitter
●Provides a selectable, per channel independent dejtteredT1 or E1 recovered
clock for system timing and redundancy
●Provides PRBS generators and detectors on each tributary for
error testing at DS1 and E1 rates as recommended in ITU-T O.151
●Provides an 8 bit microprocessor bus interface for configuration, control, and status monitoring
●Provides line and digital loopback modes
●Supports programmable inband loopback codes
●Uses line rate system clock
●Provides an IEEE 1149.1 (JTAG) compliant test access port (TAP)
and controller for boundary scan test
System Interface
●Supports the following system interfaces:
High-density SBI bus interface
High-density, low latency, SBI TR bus interface
Receive Section
●Supports T1 signal reception signal reception for distances with
typically up to 24dB of cable attenuation using PIC 22 gauge cable
●Supports E1 signal reception signal reception for distances with
typically up to 22dB of cable attenuation using PIC 22 gauge cable .
●Performs B8ZS or AMI decoding when processing a bipolar DS-1.
signal, and HDB3 or AMI decoding when processing a bipolar E1 signal
|
|
PM4329-FEI High Density T1 E1 J1 Line Interface Unit Device Integrated Circuits ICs Images
|
